home *** CD-ROM | disk | FTP | other *** search
- * PRINTER CODE DATA FOR "TWO COLUMN PRINTER" Release 6 (2COLUMNS.PRG)
- * HP LaserJet II (Internal fonts only, mainly line printer)
- *
- * IMPORTANT: Don't add or delete any commas or lines in the codes section
- * below. This includes the remarks portion of the code lines. Keep the
- * line "----CODES AND DEFAULTS---" intact. Don't use TAB's
- *
- * Codes are decimal ASCII. Full editing instructions are in 2COLUMNS.DOC
- * CPI = Characters Per Inch (pitch) pt = point (measure of character height)
- *
- $ MB=1,TS=5,CL=0 (Max Blank lines, Tab Spacing, default Column Length
- * reduction) Ranges are: MB 0-9, TS 2-9, CL 0-9 Note dollar sign
- *
- @ SORT=n, 2SIDES=n, DRAFT=y, DATE=y, DISK=n, EQUAL=y, EUROPE=n
- *
- ---------- CODES AND DEFAULTS -----------
- , Turn OFF 'Paper-Out' sensor (n/a)
- , Turn ON 'Paper-Out' sensor
- 027 038 108 055 067, aprox. 7 Lines/Inch line spacing using VMI _&l7C
- 027 069 027 038 108 055 099 050 069 027 040 115 049 048 104 049 081, see NOTE _E_&l7c2E_(s10h1Q
- 027 038 108 048 076, Cancel 'Skip-Over-Perforations' _&l0L
- , Fancy print for Heading (Wide-5 CPI) _(s5H
- 027 040 115 049 048 072, Cancel Fancy print (set 10 cpi) _(s10H
- 027 040 115 050 081, Enhanced print (LQ for Ljet) _(s2Q
- 027 040 115 049 081, Cancel Enhanced print (set draft) _(s1Q
- *
- "TXT", Default file extension to be shown in file selector box.
- 5, Number of type sizes below (up to 6 allowed)
- *
- " Line Prntr 8.5pt-21 CPI", Name of type size 1 _(s16.6h8.5V_&k5.7H
- 027 040 115 049 054 046 054 104 056 046 053 086 027 038 107 053 046 055 072, codes
- 168, Number of characters of this size that will fit on a full line
- 70, Maximum number of lines per column
- *
- " same except @8 LPI", Name of size 2 _&l6C_(s16.6h8.5V_&k5.7H
- 027 038 108 054 067 027 040 115 049 054 046 054 104 056 046 053 086 027 038 107 053 046 055 072,
- 168, Number of characters that will fit on a full line
- 81, Max lines per column
- *
- " same except @9.6 LPI", Name _&l5C_s(16.6h8.5V_&l8C_&k5.7H
- 027 038 108 053 067 027 040 115 049 054 046 054 104 056 046 053 086 027 038 107 053 046 055 072,
- 168, characters/line
- 96, lines/column
- *
- " Courier 12pt - 16 CPI", Name _(s10h12V_&k7.5H
- 027 040 115 049 048 104 049 050 086 027 038 107 055 046 053 072,
- 128, characters/line
- 70, lines/column
- *
- " Courier 12pt - 10 CPI", Name _(s10h12V
- 027 040 115 049 048 104 049 050 086, codes
- 80, characters/line
- 70, lines/column
- ******************************
- * Note: The codes above take advantage of the ability to combine certain
- sequences. The 4th entry in the --CODES AND DEFAULTS-- section is the
- initialization string. For the LaserJet II it contains the following:
- Reset/7lpi/2 line margin/10 CPI/Draft. Line spacing is set with the
- vertical motion index since the "line spacing" codes wouldn't set 7 lpi
- on the LJII that I used for testing (these did work with 8 and 6 lpi).
- There wasn't a "double width" font (5 cpi) on this printer so I left the
- "fancy print for heading" entry blank.
-
- Don't use "sort" with single sided printouts but do use it for 2 sided ones.
- Other options in the "$" and "@" lines can be set anyway you want.
- The charater equivalents if the code seqences are shown in the remarks
- sections, they are just there as a guide.
-